An Ohio industrial rubber hose manufacturer with a long history of federal workplace safety issues could have prevented a 25-year-old worker from suffering severe crushing injuries by following required safety measures, the U.S. Department of Labor has determined.
Investigators with the department’s Occupational Safety and Health Administration responded to a report from HBD/Thermoid Inc. of the worker’s contusions and fractures and their hospitalization on June 22, 2023. The incident marks the seventh time the agency has investigated safety issues at the Bellefontaine plant since 2013.
OSHA assessed HBD/Thermoid Inc. with $389,534 in proposed penalties.
The OSHA inspector learned the worker suffered injuries due to the company’s failure to follow lockout/tagout procedures. Powered belts were still energized and unguarded, pulling the worker into the machine causing the injuries.
The agency cited two repeat violations, one willful violation, one serious and one other-than-serious violation, involving lack of adequate machine guarding and required machine safety measures that isolate energy to protect workers during setup or servicing activities, commonly known as lockout/tagout procedures.
The company received a citation for lack of machine guarding on the same equipment in March 2023.
A wholly owned subsidiary of HBD Industries in Dublin, HBD/Thermoid Inc. operates manufacturing facilities in Dublin as well as in Chanute, Kansas and Oneida, Tennessee. The company makes industrial hoses, conveyor belting and duct materials for use by a wide range of industries.
Topics Ohio Manufacturing
Was this article valuable?
Here are more articles you may enjoy.
Three Charged With Helping Agents Cheat on Florida Insurance License Exams 
US P/C Insurers Post Best Q1 Underwriting Result In 17 Years 
Wildfire Threats Make Utilities Uninsurable in US West 
Coverage Needed: Hundreds of Thousands in SE Now in Flood Zones With New Maps 
